Belltec HP750 Post Driver

Drive and pull posts with one attachment

The HP750 uses a nitrogen-charged power cell to install wood posts and steel pipe posts. Its 750 ft-lb energy class and 500–900 blows per minute suit driven-post work on compatible carriers.

A modular mount supports skid steer and compact excavator configurations. The drive tool has a domed cup for correcting post alignment during installation. Multiple chain anchor points support post removal; the pulling chain also serves as a depth reference and plumb bob.

Frame and maintenance

The frame has a cavity for up to 230 lb of added ballast to improve driving efficiency and reduce vibration. The power pack has few moving components and one lubrication point. Confirm carrier capacity with the chosen mount and any added ballast.

HP750 specifications

Carrier weight class

4–6 metric tons

Hydraulic flow

11–18 GPM

Hydraulic pressure

2,000–3,000 PSI

Blow rate

500–900 per minute

Nitrogen pressure

230 PSI

Tool shank diameter

2.7 inches

Skid steer configuration

1,263 lb

Excavator configuration

800 lb

Choose the mounting configuration

Send the carrier make, model, operating weight, hydraulic flow and attachment interface, along with post material and size. EpicGrade will confirm the mount, tooling, availability and freight for your setup.

The supplied toolbox includes a nitrogen charging kit, four combination wrenches, a tool-pin punch and a top-bolt hammer wrench. Belltec lists a one-year limited attachment warranty, including tooling.